WARNING
Make sure the light switch is in the “OFF” position and the power plug is disconnected from the power
outlet prior to cleaning the glass cover.
WARNING
The light glass cover should not be in contact with water or any other liquid when it’s warm. Sudden
change of temperature may cause cracks on the glass cover.
WARNING
To ensure continued protection against electric shock:
1Connect to properly grounded outlets only.
2Do not expose to rain.
3Keep extension cord connections dry and off the ground.
Bulb Specification
Bulb Type: Halogen
Wattage: 10 watts per bulb
Voltage: 12 volts
Please contact customer service at 1-800-323-5263 for assistance on bulb replacement information.
6. To re-install the light, replace the glass cover,
insert the light bulb housing into the grill
and insert and tighten the screw.
Cleaning Method
Follow steps 1 thru 4 above for glass cover removal. Use a damp towel to clean the surface of the
glass
Cover. Make sure the glass cover is completely dry before re-installing.
22
To Next Page
Loading...
