PERFECTPRO DAB+BOX2 - DAB Dynamic Range Control (DRC)

15
GB
Dynamic Range Control (DRC) setting – DAB
DRC can make quieter sound easier to hear when your radio is used in a noisy environment.
1. In DAB band, press and hold the Info/Menu button for 2 seconds, display will show “Full scan”.
2. Rotate the Tuning control knob to nd “DRC”. Press and release the Tuning control knob to
enter adjustment mode.
3. Rotate the Tuning control knob to select required DRC setting (default is off)
DRC off DRC is switched off, Broadcast DRC will be ignored.
DRC high DRC is set as sent by broadcaster.
DRC low DRC level is set to 1/2 that sent by broadcaster.
4. Press and release the Tuning control to conrm the setting.
Note:
Not all DAB broadcasts are able to use the DRC function. If the broadcast does not support
DRC, then the DRC setting in the radio will have no effect.
1
DAB
<Full scan >
DAB
<DRC >
DRC *
<DRC off >
DRC
<DRC high >
DRC
<DRC low >
2-4