PERFECTPRO DAB+BOX2 - Bluetooth Connectivity; Pairing and Playing Bluetooth Devices

23
GB
Listening music via Bluetooth streaming
You need to pair your Bluetooth device with your DAB+BOX2 before you can auto-link to play
stream Bluetooth music through your DAB+BOX2. Pairing creates a ‘bond’ so two devices can
recognize each other.
Pairing and playing your Bluetooth device for the rst time
1. Press the Source button to select Bluetooth function. The “Bluetooth Pairing” will show on the
display.
2. Activate Bluetooth on your device according to the device’s user manual to link to the radio.
Locate the Bluetooth device list and select the device named ‘DAB+BOX2’ (With some
Smartphone’s that are equipped with earlier versions than BT2.1 Bluetooth device, you may
need to input the pass code “0000”)
3. Once connected, there will be a conrmation tone sound and the name of your connected
Bluetooth device will show on the display. You can simply select and play any music from your
source device. The volume control can be adjusted from your source device, or directly from
the radio.
4. Use the controls on your Bluetooth-enabled device or on the radio to play/pause and navigate
tracks.
Note:
1) If 2 Bluetooth devices are pairing for the rst time, both must search for your radio, it will show
its availability on both devices. However, if one device links with this unit rst, then the other
Bluetooth device won’t nd it on the list.
2) If you take your source device out of range, the connection will be temporarily disconnected
to your radio. Your radio will automatically reconnect if the source device is brought back in
range. Be aware that during the period of disconnection, no other Bluetooth device can pair or
link with your radio.
3) If ‘DAB+BOX2’ shows in your Bluetooth device list but your device cannot connect with it,
please delete the item from your list and pair the device with the radio again following the
steps described previously.
Pairing-----
Bluetooth