Need help?Do you have a question about the PerkinElmer Clarus 600/560 D MS and is the answer not in the manual?
General| Analyzer | Quadrupole |
|---|---|
| Detector | Electron Multiplier |
| Vacuum System | Turbomolecular pump |
| Type | Gas Chromatograph Mass Spectrometer (GC-MS) |
| Ion Source | Electron Ionization (EI) |
| GC Compatibility | PerkinElmer Clarus GC series (560, 600) |
| Resolution | Unit resolution (0.5 to 2.5 amu peak width) |
| Operating Temperature | 15°C to 35°C |
| Power Requirements | 100-240 VAC, 50/60 Hz |
Explains text formatting, symbols, and cautionary notes for clarity and proper use of the manual.
Outlines essential safety guidelines and general warnings for operating the Clarus MS instrument.
Details safety precautions and handling procedures for compressed gases used with the instrument.
Specifies environmental conditions required for safe and optimal instrument operation.
Lists critical safety requirements for gas delivery lines, cylinders, and ventilation.
Introduces the Clarus MS as a benchtop mass spectrometer and its system components.
Provides a high-level overview of the Clarus MS system components.
Describes the Clarus 600/560 D Gas Chromatograph and its features and configurations.
Details the function and temperature control of the GC interface transfer line.
Explains the components and function of the ion source, mass analyzer, and detector.
Outlines the vacuum system, including the rotary pump and its function.
Provides a schedule for routine maintenance tasks, categorized by frequency (daily, weekly, monthly).
Details the procedure for checking the integrity of the vacuum system for leaks.
Step-by-step instructions for replacing the instrument's filament.
Covers the maintenance procedures for the mass analyzer components.
Identifies common sources of problems in gas chromatography and mass spectrometry operations.
A table listing common problems, their probable causes, and recommended solutions.
Lists problems and solutions specific to chromatographic performance and issues.
Addresses issues related to spectral data quality, interpretation, and calibration.
To Next Page