PerkinElmer CLARUS 680 GC User Manual

Clarus 600/680 User’s Guide
4-39
4. If you require the heater on for your analysis just touch the heater button and it
will toggle to heater on.
Adjust the Make-up Gas
Make-up gas is required when using capillary columns at low flows
(10 mL/min or less). Since a PID is concentration sensitive, make-up gas flow
should be kept to a minimum to obtain the best peak shapes and sensitivity.
NOTE: Use make-up gas only if you are using a capillary column at flows of ≤10 mL/min.
The following procedures describe how to adjust the make-up gas using PPC
pneumatics.

PerkinElmer CLARUS 680 GC Specifications

General

Brand	PerkinElmer
Model	CLARUS 680 GC
Category	Laboratory Equipment
Language	English