PerkinElmer CLARUS 680 GC User Manual

Clarus 600/680 GC User’s Guide
6-55
CAUTION
To obtain the correct results, before you begin to calibrate you
must first Zero the Gas Modules.
1. From the PPC screen touch the PPC Configure button. Touch OK on the
Caution message.
2. Select the channel you need (in this example Channel A tab is selected).
Touch the Calibrate button. Select OK.

PerkinElmer CLARUS 680 GC Specifications

General

Brand	PerkinElmer
Model	CLARUS 680 GC
Category	Laboratory Equipment
Language	English