PerkinElmer Lambda 365 Installation Instructions

09931286E
13
16. Connect the power cord to the Peltier Controller.
Figure 19 Connecting the power cord
17. Turn on the AC power switch of the Lambda 365 and the Peltier Controller.
CAUTION
ATTENTION
The air vent manual button should be off before turning on the main power of the
Peltier Controller and also during the operation since it could make a trouble for
the communication between Lambda 365 and Peltier Controller.
Le bouton d'actionnement manuel de la ventilation doit être désactivé avant que
le contrôleur Peltier ne soit mis sous tension et pendant le fonctionnement de ce
dernier afin d'éviter qu'une erreur de communication entre le Lambda 365 et le
contrôleur Peltier ne se produise
Figure 20 Turn on the AC power switch
18. Check that the Power LED is on as a blue light.

PerkinElmer Lambda 365 Specifications

General

Brand	PerkinElmer
Model	Lambda 365
Category	Laboratory Equipment
Language	English