PerkinElmer Spectrum 100 Series Manual

L1050069A
14
To select the external detector in Spectrum Express software:
1. Start Spectrum Express, select the Setup menu and then click Instrument.
2. Select the Setup Instrument BeamPath tab.
3. Select Right external as the Beam Location from the drop-down list.
The external detector is selected.
NOTE: The Beam Location field is displayed in the settings table only when an external
detector is configured.

PerkinElmer Spectrum 100 Series Specifications

General

Brand	PerkinElmer
Model	Spectrum 100 Series
Category	Measuring Instruments
Language	English