Perkins 2806A-E18TA - Maintenance Section; Refill Capacities; Fluid Recommendations

Maintenance Section
Refill Capacities
i07174820
Refill Capacities
Refer to this Operation and Maintenance Manual,
“Fluid Recommendations” for information about the
fluids which are acceptable for this engine.
Lubricant Refill Capacity
Illustration 34 g02300456
Standard pan
Illustration 35 g02300473
Center pan
Illustration 36 g02109598
Deep oil pan
Table 2
Industrial Engine
Approximate Refill Capacities
Oil Sump
(1)
Liters
Quarts
Standard pan
34 L
36 qt
Center pan
60 L
63 qt
Deep Oil Pan
72 L
76 qt
(1)
These values are approximate capacities for the crankcase oil
sump which include the standard oil filters that are installed at
the factory. Engines with auxiliary oil filters will require extra oil.
Refer to the OEM specifications for the capacity of the auxiliary
oil filter.
The refill capacities for the engine crankcase reflect
the approximate capacity of the crankcase or sump
plus standard oil filters. Auxiliary oil filter systems will
require extra oil. Refer to the OEM specifications for
the capacity of the auxiliary oil filter.
Coolant Refill Capacity
To maintain the cooling system, the total cooling
system capacity must be known. The capacity of the
total cooling system will vary. The capacity will
depend on the size of the radiator (capacity). Table 3
should be completed by the customer for the
maintenance of the cooling system.
Table 3
Approximate Capacity of the Cooling System
Compartment or
System
Liters Quarts
Total Cooling System
(1)
61L 64.45 qt
(1)
The total cooling system capacity includes the following compo-
nents: the engine block, the radiator, and all coolant hoses and
lines.
i10083337
Fluid Recommendations
General Coolant Information
NOTICE
Never add coolant to an overheated engine. Engine
damage could result. Allow the engine to cool first.
NOTICE
If the engine is to be stored in, or shipped to an area
with below freezing temperatures, the cooling system
must be either protected to the lowest outside tem-
perature or drained completely to prevent damage.
52
SEBU9074-06
Maintenance Section
Refill Capacities