11
88 Workshop Manual, TPD 1458E, issue 3 - Perkins Confidential: Green
400 Series
Fuel injection pump
To remove and to fit Operation 11-3
Caution: Connections should be blanked off until assembly.
Notes:
l If the fuel injection pump is renewed, shims of the same thickness as originally fitted should be used.
l If a new fuel injection pump is fitted, it should be replaced with a fuel pump with the same part number as
originally fitted.
l When the fuel injection pump is replaced it is essential that the fuel adjustment screw is not altered from
the original setting. The maximum no load speed should be checked after assembly.
Engine Torque Nm (lbf ft) kgf m
403C-11 Fuel injection pump fasteners 6 (4.4) 0,6
403C-15
404C-22
404C-22T
Fuel injection pump fasteners 15 (11) 1,5
H1100
To Next Page
Loading...
