M1
Handling
Do not use the joystick alone as a support. Fast turns and driving on
uneven surfaces can interfere with your ability to handle the
wheelchair safely.
1. Switch on the power.
2. Select a suitable driving profile with the Profile button (if the
system is programmed for more than one driving profile).
3. Move the joystick carefully forward to drive forward or
backward to back up.
4. Adjust the speed setting with the higher and lower speed
buttons. The wheelchair’s electronics allow very slow driving
over obstacles. Drive up to the obstacle, then carefully drive over
it.
WARNING!
Risk of injury - place your feet correctly
Always make sure your feet are correctly and securely positioned on the
footplates before you operate the wheelchair. Use foot straps if necessary.
Failure to do so increases the risk of personal injury.
191
To Next Page
Loading...
