Driving
117
NOTE
Depending on the coolant temperature measured by the electronic unit, it
is possible that, in extremely cold conditions, the maximum engine speed
is limited for a specific period of time.
In case of an optional engine speed control, one of various engine speeds can be
selected with the right-hand steering column switch, if so desired.
Before driving away, check that the central "STOP" warning light is not illuminated.
ENGINE SPEED CONTROL
The minimum and maximum engine speeds that can be set are limited by a
programmed value in the electronic unit. This value may be below the idling speed.
In this case it will, however, not fall below idling speed.
The programmed engine speeds and conditions for activation or deactivation of the
engine speed control can be modified by a Authorized Dealership on request.
Activating the engine speed control
Press the 'SET+' or 'SET –' button (1) to immediately increase the engine speed
to the set speed value. This value may have been or can be changed within
specific limits by a Authorized Dealership to meet the customer's requirements.
Hold down the 'SET+'- or 'SET–' button on the steering wheel switch (1) to
gradually increase or decrease the engine speed.
To Next Page
Loading...
