Emergency Repairs
136
Tilting forward
- Apply the parking brake.
- Put the gear lever in "neutral" position.
- Close the doors.
- Turn the lever fully to the right, against the spring pressure, until it is locked in
position
; use the jack rod.
- Operate the pump so that the cab tilts forward. The cab locking mechanism
automatically releases. As soon as the cab passes its natural point of balance,
the force of gravity will gradually tilt the cab further forward without additional
pumping.
Tilting back
- Turn the lever to position
.
- Tilt the cab back by operating the pump with the jack rod. The last part of
tilting-back is effected by the cab's own weight. When the catch engages, the
cab is automatically locked.
- Leave the lever in position .
- Push the gear lever in 1st gear to lock the gearbox control.
- Put the gear lever in neutral.
Checking the cab locking
When the cab is back in its normal position, the cab lock warning lamp in the master
display should be extinguished.
To Next Page
Loading...
