Technical Data and Identification
163
Ask your lubricant and fuel suppliers whether their products comply with
specifications.
The manufacturer is not liable for damage or problems in the following instances:
- If oil has been used of a lower grade than specified.
- If oil has been used of a different viscosity than specified.
- If the specified oil change interval has been exceeded.
- If fuel, lubricants or coolants have been used which do not meet the
requirements specified.
WARNING
Avoid physical contact with:
-lubricants
- coolants
-Fuel
- battery acid
In the event of skin contact: remove substance with paper or cloth, wash with
soap and water.
Consult a doctor in the event of persistent irritation.
In the event of contact with the eyes: remove substance with soft cloth and
rinse with water.
Consult a doctor in the event of persistent irritation.
If any is swallowed: DO NOT induce vomiting. Rinse mouth, drink two glasses
of water and consult a doctor.
In the event of inhalation: get some fresh air and rest.
To Next Page
Loading...
