To Next Page

To Previous Page

Sewing

10 - 3

ERROR

10.03 Error messages

If a fault occurs, the text "ERROR" appears on the display, together with an error code

and short instructions. An error message is caused by incorrect settings, faulty elements or

seam programs as well as by overload conditions.

For an explanation of the error codes see Chapter 10.04 Explanation of the error

messages.

● Correct the error.

● Acknowledge error correction by pressing the TE/Speed

key.

Instruction Manual1
Table of Contents3
Contents4
Safety5
Directives5
General Notes on Safety5
Safety Symbols6
Important Points for the User6
Operating and Specialist Personnel7
Operating Personnel7
Specialist Personnel7
Danger8
Proper Use9
Specifications10
Versions and Subclasses11
Disposal of the Machine12
Transport, Packaging and Storage13
Transport to the Customer13
Transport Within the Customer's Premises13
Disposal of the Packaging13
Storage13
Explanation of the Symbols14
Controls15
On/Off Switch15
Keys on the Machine Head15
Pedal16
Lever for Lifting the Presser Foot16
Feed Regulator Disk / Reverse Feed Lever17
Knee Lever17
Thread Trimmer -731/0118
Switch for Thread Wiper -909/0418
Control Panel19
Screen Displays19
Function Keys19
Mounting and Commissioning the Machine21
Mounting21
Adjusting the Table-Top Height21
Adjusting the V-Belt Tension22
Mounting the Upper V-Belt Guard22
Mounting the Lower V-Belt Guard23
Mounting the Spool Holder23
Connecting the Plug-In Connections and Earth Cables24
Start Inhibitor25
Mounting the Start Inhibitor25
Checking the Start Inhibitor Function25
Basic Setting of the Machine Drive Unit26
Commissioning the Machine27
Switching the Machine On/Off27
Table Top Cutout28
Mounting the Table Top29
Preparation30
Inserting the Needle30
Winding the Bobbin Thread, Adjusting the Thread Tension31
Removing/Inserting the Bobbin Case32
Inserting the Bobbin Case / Adjusting the Bobbin Thread Tension32
Threading the Needle Thread / Adjusting the Needle Thread Tension33
Entering the Start and End Backtacks34
Sewing35
Darning Program36
Counted Seam36
Error Messages37
Explanation of the Error Signals38
Parameter Settings39
Selecting the User Level39
Example of a Parameter Input40
Liste der Parameter41
Care and Maintenance42
Cleaning the Machine42
Topping up the Oil Tank43
Wearing Parts44
Postfach46

Brand	Pfaff
Model	1171
Category	Sewing Machine
Language	English

Pfaff 1171 User Manual

Table of Contents

Questions and Answers:

Pfaff 1171 Specifications

Related product manuals