Adjustment
41
13.08 Parameter settings
O The separate parameter list for the machine describes how to select the user level and
change parameters (see chapter 1.1.2 Technician level).
A description of how to perform an Internet update of control P40 CD as well
as the "DongleCopy"
PC tool can be downloaded from the Internet address
https://partnerweb.pfaff-industrial.com/ .
13.09 Internet update of control P40 CD
O You need a dongle with the appropriate machine software to be able to perform a control
update.
O You can obtain an empty dongle using the order number 72-250 303-91.
O The "DongleCopy"
PC tool is needed to upload software onto the dongle.
To Next Page
Loading...
