Pfaff creative 1472

I
Important!
When the
main switch
is
pressed
to
switch the machine on, the sewing
lamp
lights
up.
When the machine is switched
off
by
pressing the
main switch, removing the
mains plug or by power failure, the
program memory in the computer is
saved by a
battery
back-up.
When the
machine is switched on again,
program
00
(straight stitch with needle in
middle
position) appears.
All
program
combinations entered into any
memory
are retained automatically.
If a program is
entered during sewing,
it will not become effective until the
machine is stopped and the foot con
trol is
pressed again.
The stitch width and
stitch length can
be
changed during sewing.
For
bobbin winding disengage the
sewing
action.
After bobbin
winding
engage the
sewing action again.
Owing to
the
use
of electronic compo
nents this
machine becomes warm
during
operation. This is quite normal
and of no consequence.
Batteries:
When the
machine is switched
on and
the word
“battery” is
displayed contin
uously
in four languages,
the
battery
tension is no longer
sufficient.
The
batteries must
then be replaced
by
new ones
(see
page 43). When
a pro
gram is selected
the word
“battery”
disappears from
the display.
27