Pfaff creative 1472

Top and bottom needle
position:
When the machine
stops, the needle
goes up.
Press key 15
for the needle
down position. Display A then lights
up
and
the needle will remain
down when
sewing is stopped. Press key 15 again.
The indicator light
goes out and the
needle rises and
stays at the top posi
tion.
Tie-off/buttonhole.
To sew: Press key
19: Indicator C lights up, the pro
grammed seam is tied off
at
the begin
ning, then indicator light
C goes out.
If
you push
the
key during sewing, the
light goes on and a seam is tied off
immediately, whereas
a
pattern is tied
off at the end. The display then
goes
out. Buttonhole: In
buttonhole pro
grams
90
and
91, key 19 is used
for
determining and memorizing
the length.
For more
details please see pages
78-91.
Reverse
sewing: Press key 18 before
you
start
sewing. Indicator light D
lights
up and the machine sews back
wards permanently. If
you
press the
key during sewing,
the light
will not
go
on and the machine will
sew
back
wards
as
long
as
the
key is
pressed.
Darning: The lengths of
darning pro
gram 94 are also
determined and
memorized with
key 18.
N
Electronic
bobbin thread monitoring:
Bobbin thread
monitor 14 flashes
before
bobbin thread runs
out, It goes
out again when the full
bobbin
is
inserted and sewing
is continued.
Important:
cover 33 must always
be
closed.
N
Electronic
actual speed selection:
Press key 16 for slow sewing. Display
B lights up. The machine
sews at
half
speed.
Press
key 16
again. The display
goes out and the machine sews again
at
full
speed.
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
F
F