2:5
D
E
F
G
C
B
A
C
B
A
Preparations
Threading the machine
Make sure that the presser foot is raised and the
needle is in the up position.
3ODFHWKHWKUHDGRQWKHVSRROSLQDQGÀWDVSRRO
cap of the right size.
Note: Hold thread with both hands to prevent it from
slacking while threading. This ensures that the thread
will be positioned properly in the threading path.
3XOOWKHWKUHDGLQWRWKHthread guide by pulling
LWIURPWKHIURQWWRWKHEDFN$0DNHVXUHWKH
WKUHDGFOLFNVLQWRSODFH7KHQSXOOWKHWKUHDG
underneath the EREELQZLQGHUWKUHDGJXLGH%
on the SUHWHQVLRQGLVF&
7KUHDGGRZQWKURXJKWKHULJKWKDQGWKUHDGLQJ
VORWDQGWKHQXSZDUGVWKURXJKWKHOHIWKDQG
threading slot.
%ULQJWKHWKUHDGIURPWKHULJKWLQWRWKHWDNHXS
OHYHU'DQGGRZQLQWKHOHIWKDQGWKUHDGLQJ
slot to the QHHGOHWKUHDGJXLGH(
7KUHDGWKHQHHGOH
Needle threader
7KHQHHGOHWKUHDGHUDOORZV\RXWRWKUHDGWKH
QHHGOHDXWRPDWLFDOO\7KHQHHGOHPXVWEHLQWKHXS
SRVLWLRQWRXVHWKHEXLOWLQQHHGOHWKUHDGHU
/RZHUWKHSUHVVHUIRRW
8VHWKHKDQGOHWRSXOOWKHQHHGOHWKUHDGHUDOO
WKHZD\GRZQ7KHWKUHDGHUKRRN*VZLYHOV
through the needle eye.
3ODFHWKHWKUHDGIURPWKHEDFNRYHUWKHKRRN)
DQGXQGHUWKHWKUHDGKRRN*
/HWWKHQHHGOHWKUHDGHUJHQWO\VZLQJEDFN7KH
hook pulls the thread through the needle eye
and forms a loop behind the needle. Pull the
thread loop out behind the needle.
Note: The needle threader is designed to be used for size
70-120 needles. You cannot use the needle threader for
size 60 needles or smaller, the wing needle, twin needle or
triple needle. There are also some optional accessories that
require manual threading of the needle.
When threading the needle manually make sure that the
needle is threaded from front to back. The bobbin cover
can be used as a magnifying glass.