2:11
A
D
C
B
1
Preparations
Changing the presser foot
Remove presser foot
Press the presser foot downwards until it
disengages from the presser foot holder.
Attach presser foot
/LQHXSWKHSLQVRQWKHIRRWZLWKWKHJDS
underneath the presser foot holder. Press upwards
until the foot snaps into place.
<RXFDQDOVRXVHWKHSUHVVHUIRRWXSGRZQEXWWRQV
to raise or lower the presser foot holder. Place the
presser foot under the presser foot holder, so that
the pins of the foot snap onto the presser foot holder
when lowered.
Attaching the Dynamic spring foot 6D
'LVHQJDJHWKHIDT
™
V\VWHP$5HPRYHWKH
VWDQGDUGSUHVVHUIRRW%&DUHIXOO\ORRVHQWKH
VFUHZ&XQWLOWKHFURVVKROH'LVDFFHVVLEOH
+ROGWKHIRRWLQIURQWRIWKHQHHGOH7XUQWKH
hand wheel to lower the needle into the hole of
the foot and through the needle plate.
7XUQWKHIRRWEHKLQGWKHQHHGOHVFUHZ(DQG
LQVHUWWKHSLQRIWKHIRRWLQWRWKHFURVVKROH'
of the presser foot holder.
3XVKWKHIRRWLQWRWKHKROHDVIDUDVLWZLOOJR
ZKLOHWLJKWHQLQJWKHVFUHZ&
7RUHPRYHWKHHPEURLGHU\IRRWORRVHQWKHVFUHZ
&VTXHH]HWKHHPEURLGHU\IRRWWRJHWKHUDQGSXOO
LWRXWWRWKHULJKW7LJKWHQWKHVFUHZ
2
3
4
E
C