4:5
Stitch
density -
Stitch
density +
17
13
7 8
E
F
Sewing mode
Stitch density (13)
7KHVWLWFKGHQVLW\FRQWURODGMXVWVWKHGHQVLW\WKH
closeness of the satin stitches that make up the
HQWLUHVWLWFK7KHGHQVLW\GRHVQRWDIIHFWWKHDFWXDO
length of the entire stitch.
7RXFKWRGHFUHDVHWKHGHQVLW\7RXFKWRLQFUHDVH
the density. 7KHQXPEHUDERYHWKHFRQWUROVKRZV
the distance between stitch points within the satin
stitch in mm.
Note: This is often used with specialty threads and when
a less dense satin stitch is desired.
Mirroring (7 and 8)
7RPLUURUVWLWFKHVRUVHTXHQFHVVLGHWRVLGHWRXFK
LFRQ)RUPLUURULQJHQGWRHQGWRXFKLFRQ
Note: Buttonholes cannot be mirrored.
Balance (17)
When sewing on special fabrics or doing a special
WHFKQLTXHWKHEDODQFHPD\QHHGWREHDGMXVWHG
6WDUWE\VHZLQJDVWLWFKRQDSLHFHRIVFUDSIDEULF
7RXFKWKHEDODQFHLFRQWRRSHQWKHEDODQFH
ZLQGRZ8VHWKHDQGLFRQV)WRDGMXVWWKHVLGH
WRVLGHDQGRUIRUZDUGEDFNZDUGEDODQFHRIWKH
VWLWFK8VHWKHSDQLFRQV(WRVHHWKHZKROHVWLWFK
&KDQJHWKHSLFWXUHRQWKHVFUHHQWRPDWFK\RXU
sewn sample. When you sew again, the balance will
be corrected.
Note: Buttonholes can also be balanced.