Pfaff expression 2038

2:5
B
A
C
Preparations
Winding from the second spool pin
Insert the second spool pin in the hole provided.
Threading
Thread as shown on page 2:4.
Switch on the main switch
Hold the end of the thread fi rmly and press the foot control. As
soon as the bobbin is full, the winding action will be stopped
automatically. Cut the thread, push the bobbin to the left and
remove bobbin from the winder.
Bobbin door
Switch off the main switch
Hold the bobbin door (46) at the left side and open it towards
the front.