Pfaff expression 2038

1:2
Introduction
1. Introduction
Utility stitches (2048) 1:4
Utility stitches (2038) 1:6
Decorative stitches 1:8
2. Preparations
Carrying case 2:1
Lid with stitch chart 2:1
Electrical connection 2:2
Voltage switch 2:2
Removable accessory tray 2:3
Bobbin winding 2:4-5
Bobbin case 2:6-7
Threading the needle thread 2:8
Integrated needle threader 2:9
Drawing up the bobbin thread 2:10
Presser foot lifter 2:10
Thread cutter 2:10
Changing the presser feet 2:11
Winding a bobbin through
the needle 2:12
Changing needles 2:13
Threading twin needle 2:13
Integrated Dual Feed/IDT 2:14
Lowering feed dog 2:15
Altering stitches 2:16
3. Sewing
Adjusting the contrast
in the expression window 3:1
Stitch selection 3:1
Altering the stitch
width/needle position 3:2
Altering the pattern
width/stitch length 3:2-3
Bobbin thread monitor (model 2048) 3:3
Altering the pattern
length/stitch density 3:3
Balance 3:3
Info button/reverse sewing button 3:4
Sewing function buttons 3:5
“Lock” button 3:6
Twin needle 3:6
Formation of the stitches 3:7
Stitch sequences 3:8
Buttons for the stitch sequence 3:8
Opening an m-memory 3:8
Deleting from the stitch sequence 3:9
Inserting into the stitch sequence 3:9-10
Deleting a stitch sequence 3:10
Deleting all M-memories 3:10
Changing a pattern within a sequence 3:10
“Pattern start” function 3:11
Non-elastic/elastic stitches 3:11-12
Overlock stitches 3:13
Darning 3:14
Free Motion Sewing 3:14
Gathering 3:15
Bridging stitches 3:16
Cross hem stitches 3:16
Hemming 3:16
Shell edging 3:16
TABLE OF CONTENTS