2:16
A
C
B
Preparations
Altering stitches
Adjust the length, width, balance, density or needle position of
stitches by touching the appropriate -/+ buttons to the right of
the window. Each change is visible in the window.
If you tap on your foot control while sewing, the needle can be
raised or lowered. This does not change the pre-set needle stop
position.
Stitch width
Pattern width
Needle position for straight stitches A
Stitch length
Pattern length B
Stitch density
Pattern density
Balance C
To change: Use -/+ buttons:
To Next Page
Loading...
