3:1
Sewing
Adjusting the contrast on the expression window
The contrast setting in the window may be changed for
different lighting situations.
This setting can be readjusted with the contrast control (54).
Stitch selection
There are three ways of selecting your desired stitch:
1. With the selection wheel (selection buttons, model 2038): for
scrolling back ward and forward in the stitches.
Clockwise = in ascending order
Counterclockwise = in descending order
Model 2038:
> in ascending order
< in descending order
If you are in the last stitch, No. 119, (No. 79 in the case of model
2038) and continue to scroll you will return to stitch No. 0.
2. With the direct selection buttons for instant selection of the
most commonly used stitches (0 - 9) and for the selection of
the alphabets.
3. With the direct selection buttons to choose the stitch
number: To select program No. 23, press button 2 then press
button 3. The stitch number appears in the window.
Stitch selection on model 2048
Stitch selection on model 2038
Bobbin thread monitor (model 2048)
If the bobbin is nearing its end [2 ¼ yd (2 m)-3 ¼ yd (3 m)], or
there is no thread on the bobbin, the bobbin symbol appears in
the window.
The symbol disappears after a full bobbin is inserted and you
start to sew again.
3. Sewing
To Next Page
Loading...
Need help?
General
