Pfaff Powerline 2545 User Manual

34
Care and maintenance
Before commissioning the machine, fi ll in oil through hole 1 until the oil level
indicator 2 is at the "MAX" marking.
PFAFF 2545 / 2546 BASIC
Check the oil level daily before starting the machine!
The level of the oil in indicator 2 must not sink below the "MIN" marking and
not exceed the "MAX" marking.
If required, fi ll oil into the tank through hole 1.
PFAFF 2545 / 2546 CLASSIC and PLUS
The oil level is controlled by sensor.
When the minimum oil level is reached, key B on the machine head shines red
(see Chapter 7.03 Keys on the machine head).
If required, fi ll oil into the tank through hole 1.
Oil level indicator 2 must not exceed the "MAX" marking.
Only use oil with a medium viscosity of 22.0 mm²/s at 40° C and a density
of 0.865 g/cm³ at 15°C!
We recommend PFAFF sewing-machine oil, part No. 280-1-120 144.
9.03 Lubricating
Max
Min
Fig. 9 - 02
1
2

Pfaff Powerline 2545 Specifications

General

Brand	Pfaff
Model	Powerline 2545
Category	Sewing Machine
Language	English