12
User’s Guide
Winding the Bobbin
5. Press the Start/Stop button to begin winding. After the bobbin
has wound several turns, press the Start/Stop button to stop
winding and trim the thread tail from the top of the bobbin.
6. Use the up and down directional keys
to slow or
speed the winding.
7. Press the Start/Stop button to start the bobbin winding again.
Press the Start/Stop button to stop the winding process
when the bobbin is full.
NOTE: Winding will not stop automatically when the bobbin is full.
8. Disengage the bobbin spindle from the winder by pushing
the bobbin spindle to the left. Pull the bobbin straight up to
remove.
Keep extra bobbins
wound so that you
will have plenty
to fi nish large
embroidery designs
without stopping
to wind. Use
embroidery bobbin
thread for winding
your bobbin.
To Next Page
Loading...
