7
ON
OFF
INTRODUCTION
Connecting the machine
Turning the Machine On
Make sure that the machine is turned off (the main power
switch is set to “O”) and then insert the power supply cord
into the power supply jack on the right side of the machine.
1. Insert the plug of the power supply cord into a household
electrical outlet.
2. Set the main power switch on the right side of the machine to
on (set it to “I”).
Turning the Machine Off
Make sure that the machine is not sewing.
1. Press the bottom of the main power switch on the right side
of the machine to “O”. The sewing light goes off when the
machine is turned off.
2. Unplug the power supply cord from the electrical outlet by
grasping the plug.
3. Unplug the power supply cord from the power supply jack.
To Next Page
Loading...
Need help?
General
