11
GET READY TO EMBROIDER
11
Winding the Bobbin
1. Plug in the machine and turn it on.
2. Place a spool of thread on the
horizontal spool pin. Then place a
spool cap on the spool of thread that
is slightly larger than the size of the
thread spool.
3. Bring thread from spool to the left
into fi rst guide (a) from the front then
under the second guide from the
back (b). Bring thread forward and
around the bobbin tension guide (b),
pulling thread into the guide and to
the right to the bobbin winder spindle
(c).
4. Pass the thread through the small
hole on the bobbin from inside the
bobbin to out. Match the slot on
the bobbin to the pin on the bobbin
winder spindel and push the bobbin
onto the spindel. Press the bobbin
winder spindle to the right.
To Next Page
Loading...
