Pfaff SMART 300E - Replacing the Needle

19
GET READY TO EMBROIDER
Replace the Needle
1. Turn off the power to the
machine.
2. Lower the presser foot.
3. Loosen the needle screw
using the screwdriver
tool supplied with the
machine, or with any
suitable screwdriver.
Loosen only enough to
remove the needle.
4. Remove needle.
5. Insert the new needle as
far as it will go. The fl at
side of the needle will be
facing towards the back.
Tighten the needle screw
using the screwdriver
tool.
Replacing a needle
with a fresh one can
help your outlines
stitch more cleanly.