685408006D 31
during transport. Especially pay attention to loose parts, dents, scratches, visible loss of oil etc.
Any damage must be reported immediately to the forwarding agent (Also refer to warranty 16 ).
Moreover, the latest edition of the "Pfannenberg After Sales Service Declaration" shall apply.
•Before disposing of packing material ensure that it does not contain any loose components.
Burr caused by production may be present on the metal edges of the unit. Always wear protective gloves
when carrying out maintenance work and installation.
In case of a warranty claim exact details on the fault (photograph, if possible) and the indication of type and
serial number of the cooling unit are required.
3 Scope of delivery and options
The Scope of delivery includes:
• Cooling unit
• Enclosed package (among other things, fastening material, electrical plug-type connectors)
• Quick guide
• Special accessories, if applicable
4 General Information
• Old devices can be properly disposed of by Pfannenberg.
They must be sent to one of our works shipment/postage paid.
• All cooling units produced by Pfannenberg are free from
– Silicone composite
– PCT
– Asbestos
– Formaldehyde
– Cadmium
– Substances impairing wetting.
• Every cooling unit is checked to ensure that it is tight according to the provisions of 9.ProdSV (German
regulations covering accident prevention).
• Pfannenberg has done electrical safety testing to every cooling before delivery.
5 Name plate
For the installation and maintenance, please take note of the technical data on the name plate which can be
found on the back of the cooling unit.
To Next Page
Loading...