Pfannenberg DTX 8161 - Technical Data

685408006D 37
8.5 Technical Data
Cooling data
DTI/DTS 8161 IC
Cooling capacity at A35/A35 * **
Q
0
1000 W
Cooling capacity at A50/A35 * **
Q
0
860 W
Refrigerant type R 134a *
Refrigerant amount 320 g *
Thermostat setting, (factory set)
+35°C (+95°F)
failure indication: Enclosure internal temp. (factory set)
> +50°C (+122°F)
Enclosure internal temp.
+25°C (+77°F) . . . +45°C (+113°F)
Air volume, external/ internal circulation °)
1200m³/h/570 m³/h
Condensation discharge
Condensate discharge pipe. (Option: condensate evaporator )
Noise level (1m)
 68 dB(A)
Electrical data
Rated voltage/ Mains frequency
230 V/50 Hz
Operating range
DIN IEC 60038
Power consumption *
P
el
A35/A35: 620 W (without option)
Option: Condensate evaporator(CM)
P
el
30-110W (A35/A35 ca. 70W)
DTI/DTS 8161 IC HS
DTI/DTS 8161 IC CM LAP
DTI/DTS 8161 IC HT
Current capacity *
I
nom max
4,2A
9,5A
9,0A
Starting current *
I
Start max
17,5 A
28,5 A
28,0A
Heatting capacity
-
1000W
1000W
Ambient air temperature
+15°C (+59°F)
.+55°C (+131°F)
-40°C (-40°F) .
+55°C (+131°F)
+15°C (+59°F) .
+55°C (+131°F)
Dimensions
Height X Width X Depth °°)
976 X 450 X 312 mm
Installation depth DTI °°)
ca.64 mm
Weight(with front cover on)
DTI/DTS 8161
DTI/DTS 8161 LAP
DTI/DTS 8161 IC HT
40.7kg
41.4kg
40.0kg
Installation attitude/ Unit construction
Vertical Standard:steel Option:Stainless
Corrosion protection
Standard:galvanized, electrostatically powder coated (200°C)
Option:Stainless,Aluminium
Protection system according to EN 60529
IP54 against the enclosure, under correct operating conditions.
IP34 against the environment, under correct operatingconditions.