EasyManua.ls Logo

Pfannenberg DTX 8161 - Trouble Shooting; Warranty Conditions

Pfannenberg DTX 8161
50 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
685408006D 48
persons cannot start the cooling unit.
When the cooling unit is no longer needed, it must be disposed of by authorized personnel in accordance with
all applicable environmental protection regulations. (See section 4)
15 Trouble shooting
In spite of careful maintenance, the equipment may still have a failure sometime. The real-time self-check
function help diagnose the failure.
If a fault occurs, the display will show the relevant alarm code, Below is the trouble shooting guide .
Alarm codes list:
Alarm code
Description
Trouble shooting method
AL01
Sensor 1 error
Check sensor of Pb1
AL02
Sensor 2 error
Check sensor of Pb2
AL03
Sensor 3 error
Check sensor of Pb3
AL04
Sensor 4 error
Check sensor of Pb4
AL05
Cabinet door open
Check door switch
AL06
Internal fan fault
Check internal fan
AL07
System pressure too high
Check external fan and condenser
AL08
Compressor fault
Check compressor
AL09
Condenser dirty & blocked
Check condenser if it’s dirty and blocked, or check
external fan
AL10
Refrigerant leakage
Check system leakage
AL11
High temperature
Check heat load, or check other fault code
AL12
External fan fault
Check external fan or check condenser if it’s dirty and
blocked
AL13
Evaporator dirty & blocked,
or internal air flow blocked
Check internal fan channel or evaporator or internal fan
AL14
Exceed temperature range
Cooling uints cannot work in enviroment above 55
degrees
AL17
Power voltage fault
Check power supply
Non-authorized personnel should not repair the equipment.
16 Warranty Conditions
Warranty becomes null and void:
•In case of improper usage of the unit, noncompliance with operating conditions or non observance of
instructions;
•If operated in rooms in which corrosives or acids are present in the atmosphere;
•In case of damage caused by contaminated or jammed air filters;
•If a non-authorised person interrupts the cooling circulation, modifies the unit or changes the serial number;
•In case of damage caused by transport or by accidents;
•For the exchange of parts by unauthorized companies;
In order to maintain your warranty rights please observe the following when returning the unit;
•Enclose an exact description of the fault in the shipping package.
•Enclose proof of delivery (delivery note or copy of invoice).
•Return the unit together with all accessories;use the original packaging or packaging of equivalent quality,
send the unit freight prepaid and covered by an adequate transport insurance. Observe the hints on transport