Maintenace, Troubleshooting
→ [1]
Gauge failures due to contamination, as well as
expendable parts (filament), are not covered by the
warranty.
Returning the Product
WARNING
Caution: forwarding contaminated products
Products returned to Pfeiffer Vacuum for service
or repair should preferably be free of harmful
substances (e.g. radioactive, toxic, caustic or
microbiological).
Adhere to the forwarding regulations of all in-
volved countries and forwarding companies and
enclose a completed declaration of contamina-
tion.
Products that are not clearly declared as "free of harmful
substances" are decontaminated at the expense of the
customer.
When returning a product for service, put it in a tight and
impact resistant package.
Disposal
DANGER
Caution: contaminated parts
Contaminated parts can be detrimental to health.
Before beginning to work, find out whether any
parts are contaminated. Adhere to the relevant
regulations and take the necessary precautions
when handling contaminated parts.
N
WARNING
Caution: substances detrimental to the environ-
ment
Electronic components must be disposed of in
accordance with special regulations.
Dispose of such products in accordance with the
relevant local regulations.
Separating the components
After disassembling the product, separate its components
according to the following criteria:
• Contaminated components
Contaminated components (radioactive, toxic, caustic, or
biological hazard etc.) must be decontaminated in
accordance with the relevant national regulations,
separated according to their materials, and recycled.
• Other components
Such components must be separated according to their
materials and recycled.
Further Information
[1] www.pfeiffer-vacuum.net
Operating Instructions
Compact FullRange™ BA Gauge PBR 260
BG 805 171 BE
Pfeiffer Vacuum GmbH, D–35614 Asslar,
Deutschland
[2] www.pfeiffer-vacuum.net
Operating Instructions
MaxiGauge™ TPG 256 A
BG 805 186 BE
Pfeiffer Vacuum GmbH, D–35614 Asslar,
Deutschland
Declaration of Contamination
Legally binding declaration:
We hereby declare that the information on this form is
complete and accurate and that we will assume any further
costs that may arise. The contaminated product will be dis-
patched in accordance with the applicable regulations.
Organization/company
Address
Post code, place
Phone Fax
Email
Name
Company stamp
Copies: Original for addressee
1 copy for accompanying documents
1 copy for file of sender
Operating fluid(s) used
(Must be drained before shipping.)
The service, repair, and/or disposal of vacuum equipment and com-
ponents will only be carried out if a correctly completed declaration
has been submitted. Non-completion will result in delay.
This declaration may only be completed (in block letters) and signed
by authorized and qualified staff.
Reason for return
Description of product
Type
Part number
Serial number
no
yes
Used in copper process
Seal product in plastic
bag and mark it with a
corresponding label.
This form can be downloaded from our website.
The product is free
of any substances
which are damaging
to health.
yes
Process related contamination of product:
toxic no
1) yes
corrosive no
1) yes
biological hazard no
yes
2)
explosive no
yes
2)
radioactive no
yes
2)
other harmful substances no
1) yes
1) or not containing any
amount of hazardous
residues that exceed the
permissible exposure limits
2) Products thus
contaminated
will not be
accepted with-
out written
evidence of
decontami -
nation.
Precautions associated with
substance
Action if human
contact
Trade/product name
manufacturer
Chemical name
(or symbol)
Harmful substances, gases and/or
by-products
Please list all substances, gases, and by-products
which the product may have come into contact with:
Declaration of Conformity
We Pfeiffer Vacuum, hereby declare that the
equipment mentioned below complies with the
provisions of the Directive relating to electrical
equipment designed for use within certain vol-
tage limits 73/23/EEC and the Directive rela-
ting to electromagnetic compatibility
89/336/EEC
Compact FullRange™ BA
Gauge
PBR 260
Part Numbers
PT R27 000 (DN 25 ISO-KF)
PT R27 001 (DN 40 ISO-KF)
PT R27 002 (DN 40 CF-R)
Standards
Harmonized and international/national standards and speci-
fications:
• EN 50081-1 (Electromagnetic compatibility: generic
emission standard
)
• EN 50082-2 (Electromagnetic compatibility: generic
immunity standard)
• EN 61010-1 (Safety requirements for electrical equip-
ment for measurement, control and labo-
ratory use)
Signature
Pfeiffer Vacuum GmbH, Asslar
18 November 2005
Wolfgang Dondorf
Managing director
Berliner Strasse 43
D–35614 Asslar
Deutschland
Tel +49 (0) 6441 802-0
Fax +49 (0) 6441 802-202
info@pfeiffer-vacuum.de
www.pfeiffer-vacuum.net
To Previous Page
Loading...
Need help?
General
