Need help?Do you have a question about the Pfeiffer Vacuum FullRange PBR 260 and is the answer not in the manual?
General| Power Supply | 24 V DC |
|---|---|
| Protection Class | IP40 |
| Material | Stainless Steel |
| Sensor Type | Pirani |
| Temperature Range | 0 to 50 °C |
| Output Signal | Analog 0-10 V |
| Storage Temperature | -20 to +70 °C |
| Interface | RS485 |
Defines the intended applications and limitations for vacuum measurement.
Explains the operational principle involving Bayard Alpert and Pirani systems.
Provides general safety guidelines and precautions for operation.
Outlines conditions that void liability and warranty.
Details measurement ranges, accuracy, and repeatability.
Describes the output signal characteristics and error signals.
Describes the zero point adjustment procedure for the gauge.
Lists admissible temperature ranges for storage and operation.
Provides dimensional drawings and weights for DN 25 ISO-KF flange.
Shows dimensions and weight for the DN 40 CF-R flange.
Details safety precautions for vacuum connection and potential hazards.
Lists tools and materials for removing and installing the electronics unit.
Steps to unscrew and remove the electronics unit from the sensor.
Steps to place and secure the electronics unit onto the sensor.
Notes about heat rise and recommends horizontal installation for bakeout.
Step-by-step instructions for mounting the extension.
Instructions for connecting the gauge to a MaxiGauge™ unit.
Explains the measuring principle and behavior of the BA system.
Explains the Pirani measurement principle and its range.
Discusses factory calibration and potential need for adjustment.
Provides a formula for converting pressure readings for different gases.
Explains when and how to adjust the gauge's characteristic curve.
Step-by-step guide for replacing the baffle.
Criteria for sensor replacement due to contamination or fault.
Lists common problems and their possible causes and corrections.
Step-by-step instructions for deinstalling the gauge.
Safety warning regarding the return of potentially contaminated products.
Lists available sensor cable options and their ordering numbers.
Guidelines for ordering spare parts, including product nameplate details.
Procedures for handling and disposing of contaminated components.
Guidelines for recycling non-contaminated components.
Provides a conversion table for various pressure units.
Details the relationship between the measuring signal and pressure.
Explains gas type dependence and provides a conversion formula for the hot cathode range.
Shows pressure indication ranges for the Pirani system.
To Next Page
