Pfeiffer Vacuum FullRange PBR 260 - Replacing the Baffle; Baffle Replacement Procedure

22
BG 5171 BEN / B (2017-02) PBR 260
In case of severe contamination the baffle can be replaced.
Caution
Caution: dirt sensitive area
Dirt prolongs the pumpdown process.
Always wear clean, lint-free gloves and use clean tools when working
in this area.
• New baffle (→  26)
• Screw driver No. 1
• Stick (e.g. pencil)
a) Carefully remove the baffle with the screw driver.
b) Carefully place new baffle onto the sensor opening.
c) With a stick carefully press the baffle down in the middle until it catches in the
sensor opening.
5.5 Replacing the Baffle
Tools / material required
Procedure