Name: Pfeiffer Vacuum OmniStar GSD 350
Brand: Pfeiffer Vacuum
Rating: 4 (1 reviews)

To Next Page

To Previous Page

The product GSD 350 OmniStar/ThermoStar

- conforms to the UL standards

- is certified to the CAN/CSA standards

UL 61010-1:2012 R4.16

Safety requirements for electrical equipment for measurement, control and laboratory use

Part 1: General requirements

UL 61010-2-010:2014

Safety requirements for electrical equipment for measurement, control and laboratory use

Part 2-010: Particular requirements for laboratory equipment for the heating of materials

CAN/CSA No. 61010-1:2012 + GI1 + GI2 (R2017)

Safety requirements for electrical equipment for measurement, control and laboratory use

Part 1: General requirements

- conforms to the following rules and regulations

FCC, Title 47 CFR, Part 15, Subpart B

Telecommunication - Radio Frequency Devices - Unintentional Radiators

CAN/CSA No. 61010-2-010:2014

Safety requirements for electrical equipment for measurement, control and laboratory use

Part 2-010: Particular requirements for laboratory equipment for the heating of materials

Questions and Answers:

Need help?

Do you have a question about the Pfeiffer Vacuum OmniStar GSD 350 and is the answer not in the manual?

Pfeiffer Vacuum OmniStar GSD 350 Specifications

General

Type	Quadrupole Mass Spectrometer
Power Supply	100-240 V AC, 50/60 Hz
Mounting Flange	DN 40 CF
Interface	RS-232, Ethernet
Detection Limit	1x10^-14 mbar
Measurement Modes	Partial pressure measurement, Total pressure measurement
Applications	Vacuum process monitoring, Leak detection, Residual gas analysis
Resolution	Unit mass resolution
Ion Source	Electron Impact (EI)
Detector	Faraday cup / Secondary electron multiplier
Detectable Gases	All gases and vapors