EN – 6
Recommended tools
• Two 5.5 x 100 flat screwdrivers
• Thin spanner: 10 mm on face
• Male hexagonal wrench: 2.5 - 3 - 4 - 5 - 12 mm
5
• 12 mm female hexagonal wrench
Tools kit This kit contains the usefull tools to
disassemble and reassemble the shaft
seals in the different flanges and
flanged stators (see table bellow).
Pump models P/N
All pumps 112397
Specific tools
HP and LP no flanged
stator (plan D)
HP flanged stator
(plan C)
LP flanged stator
(plan C)
Lip seal assembly mandrel
A462651 A462651 A462651
Protective sleeve
A463545 A463545 A463545
Lip seal disassembly mandrel
– – A462649
Tools and consumable products
(cont’d)
To Next Page
Loading...
Need help?
General
