PG Drives Technology ACT445M SIGMADRIVE User Manual

PG DRIVES TECHNOLOGY AC TRACTION – SIGMAGAUGE
• Once the cut-out is ready, ensure that all debris is removed and the surface is clean.
• Place the Sigmagauge in the hole.
• Raise the Securing Bracket from beneath the dash surface and locate onto the mounting bolts.
• Once located, fasten using the M5 nuts supplied.
To maintain a good weather seal, it is suggested that a waterproof adhesive is used to seal and
secure the Sigmagauge to the dash.
4 Configuring the Sigmagauge
To access the Gauge Set-up menu, press and hold the ‘SEL’ button for 3 seconds. Features such as the Service Interval Timer,
Hours Counter and Text Field can be adjusted and optionally protected with a pin code. Use the up and down arrow buttons to
choose an option, ‘SEL’ to select an option and the ‘+’ & ‘-’ buttons to amend the current value.
The table below shows the structure of the Gauge Set-up menu. It describes the action and range of each available parameter.
Ref. Parameter Sub Menu Reference Sub Menu Description Range & Action
1 Service timer 1. Svc interval Set the time interval for the
next service
0 – 32767 Hrs. (Warning starts
40 hours before service
required)
2. Count hours Set to count ‘work’ (drive) or
‘key’ hours
Work / Key Hrs.
3. Reset timer Resets the Service Timer
(sub menu ref ‘4’)
To confirm, press ‘SEL’
4. Svc time Indication of the actual
counter value
Indication only
2 Hours counter 1=Key, 2=Work Select to indicate ‘work’ or
‘key’ hours
Select with up & down arrows
and confirm with ‘SEL’
3 Information field 1. Adjust field Free 2x9 character field to
show customized text
4 Pincodes 1. Service timer Sets pin code for service
timer access
2. Information field Sets pin code for
information field access
Use up and down arrows for
position, ‘+’ & ‘-’ to change
value and ‘SEL’ to return to
menu
3. Reset all pincodes Reset all pin codes Contact PGDT
5 About SW version and date Indication of the software
version and date
Indication only
6 Return - Select to return to main
menu
Select with up & down arrows
and confirm with ‘SEL’
SK79646-01 89

PG Drives Technology ACT445M SIGMADRIVE Specifications

General

Brand	PG Drives Technology
Model	ACT445M SIGMADRIVE
Category	Controller
Language	English