Need help?Do you have a question about the Phanteks Enthoo Luxe and is the answer not in the manual?
General| Case Type | Full Tower |
|---|---|
| Motherboard Support | E-ATX, ATX, Micro-ATX, Mini-ITX |
| Internal 3.5" Bays | 6 |
| Expansion Slots | 8 |
| Maximum CPU Cooler Height | 193 mm |
| Bottom Fan Support | 2 x 120 mm |
| Front Radiator Support | up to 360 mm |
| Top Radiator Support | up to 360 mm |
| Side Panel Window | Yes |
| Power Supply Support | ATX |
| Front Ports | 2 x USB 3.0, 2 x USB 2.0 |
| Front Fan Support | 3 x 120mm/140mm |
| Top Fan Support | 3 x 120 mm |
| Rear Fan Support | 1 x 120 mm |
| Rear Radiator Support | 120mm/140mm |
| Color | Black, White |
| Material | Steel, Plastic |
| Dimensions (H x W x D) | 560 mm x 235 mm x 550 mm |
Step-by-step guide to removing the top chassis panel.
Instructions for removing the HDD chassis panel.
Guide to removing the side panels of the case.
Steps to remove the power supply unit cover.
Procedure for installing the power supply unit.
Steps to reinstall the power supply unit cover.
Instructions for installing Solid State Drives.
Procedure for installing 3.5-inch hard drives.
Procedure for installing 2.5-inch hard drives.
Connecting the PWM hub to the CPU_FAN header.
To Next Page