Need help?Do you have a question about the Phanteks Enthoo Primo and is the answer not in the manual?
Diagram showing LED ON/OFF switch connection.
Diagram and pinout for the Molex connector.
Diagram and pinout for audio connections.
Diagram for front panel connections (Power, Reset, LEDs).
Diagram and pinout for USB 3.0 connections.
Diagram and pinout for USB 2.0 connections.
Remove reservoir bracket before installing motherboard.
Standoff screws pre-installed for ATX, extra for E-ATX.
Install motherboard using provided M3 screws.
Instructions for sliding and screwing in SSDs.
Instructions for releasing the ODD cover to install drives.
Method for aligning and locking brackets for installation.
How to place and lock 3.5" hard drives into trays.
How to align and screw in 2.5" SSDs onto mounting holes.
Instructions for unscrewing thumbscrews to remove HDD cages.
Steps to reposition HDD cages to alternate locations.
Diagrams showing radiator sizes compatible with the case.
Compatibility table for 120mm radiators in different locations.
Compatibility table for 140mm radiators in different locations.
Diagrams illustrating the installation of radiator brackets.
Details and mounting options for the pump bracket.
Instructions for installing the reservoir bracket.
To Next Page
General