Phanteks Enthoo Primo - 12. PWM HUB

21
12. PWM HUB
PWM Hub can be mounted on dierent locations.
机箱预留有3个风扇控制板 安装位置
Fan1
Fan2
Fan3
Fan4
Fan5
Fan6
4 Pin
MOLEX
CONNECTOR
PWM hub will enable PWM function to 3-pin fans. Fan 1 can only be connected to one fan and cannot be split. Fan 2 - Fan 6 can
be split to multiple fans. Total of 11 fans can be connected to the PWM hub. All PWM functions will be controlled by fan 1.
风扇自动调速器（PWM hub）可以驱动3 pin /4pin风扇。Fan1 只可连接一个风
扇，不能分接。Fan 2~ Fan 6 可以分成多复合型风扇。最多可安装11个风扇到控制
器。所有的PWM 功能将与Fan 1 同步。