16
INSTALLING DRIVES ENTHOO PRO II
HDD
REQUIRES:
3.5” HDD INSTALLATION
4x Phanteks Stackable 3.5” HDD Brackets are included.
Additional brackets are sold separately (PH-HDDKT_03).
The HDD bracket can also house
a 2.5” SSD instead of a 3.5” HDD.
HDD INSTALLATION
STACK / INSTALL
REMOVE
2
1
1. LIFT UP LATCH
2. PULL OUT
2
1
BOTTOM COMPARTMENT
4x HDD Brackets can be positioned in the bottom compartment. The cables can be
easily routed through the rubber grommet.
4x
To Next Page
Loading...
