Phanteks Enthoo Pro M Installation Guide

Please take a moment to carefully go through the quick installation guide. Phanteks will not take responsibility for any damages
incurred due to incorrect installation and usage of this product.
Install the motherboard with the provided M3 screws.
Installez la carte mère avec les vis M3 fournies
Installieren Sie das Motherboard mit den mitgelieferten M3-Schrauben.
installare la scheda madre con le vi M3 fornite in dotazione.Instale a placa mãe com os
parafusos M3 fornecidos.
instale la placa base con los tornillos M3 que se suministran.
Installeer het moederbord met de meegeleverde M3- scrhoeven
This is a quick installation guide to help you get started with the Enthoo PRO M. For the full
(detailed) version of the manual please visit www.phanteks.com.
1. Power Buon
2. USB 3.0
3. MICROPHONE
4. HEADPHONE JACK
5. RGB LIGHT BUTTON
1. Ein-/Austaste
2. USB 3.0
3. Mikrofon
4. Kopörer
5. LED-Schalter
1. Bouton d’alimentaon
2. USB 3.0
3. Microphone
4. Casque
5. Interrupteur LED
1. Botón de alimentación
2. USB 3.0
3. Micrófono
4. Cascos
5. Interruptor LED
1. Botão de Alimentação
2. USB 3.0
3. Microfone
4. Fone de ouvido
5. Chave de LED
1. Tasto d’alimentazione
2. USB 3.0
3. Microfono
4. Cue
5. Interruore LED
1. Power knop
2. USB 3.0
3. Microfoon
4. Hoofdtelefoon
5. LED bediening
V1.0
Unscrew the 4 thumb screws to remove the side panels.
Dévissez les vis à main pour enlever les panneaux latéraux.
Lösen Sie die 4 Rändelschrauben zum Enernen der seitlichen Blenden.
Svitare le 4 vi per rimuovere i pannelli laterali.
Desaperte os 4 parafusos para remover os painéis laterais.
Desatornille los 4 tornillos de pulgar para rerar los paneles laterales.
Schroef 4 duimschroeven los om de zijpanelen te verwijderen.
Unscrew the 2 thumb screws to remove the side panels.
Dévissez les 2 vis à main pour enlever les panneaux latéraux.
Lösen Sie die 2 Rändelschrauben zum Enernen der seitlichen Blenden.
Svitare le 2 vi per rimuovere i pannelli laterali.
Desaperte os 2 parafusos para remover os painéis laterais.
Desatornille los 2 tornillos de pulgar para rerar los paneles laterales.
Schroef 2 duimschroeven los om de zijpanelen te verwijderen.
1.
I/O PANEL
INSTALLATION GUI DE
TEMPERED GLASS EDITION
phanteks
2.
PANEL REMOVAL
3.
MOTHERBOARD INSTALLATION
Some motherboard types require installation / repositioning of
the standoffs. Please consult your motherboard manual for the
correct standoff positioning.
Long Press: On/O
Short Press (<1sec): Choose LED Color (10 colors)
2 Sec Press: Choose Mode
Mode 1: Static Mode 2: Breathing Mode 3: Color Cycle
<1 sec
2 sec
HOLD
RGB LED Control (5) Instructions:

Phanteks Enthoo Pro M Specifications

General

Brand	Phanteks
Model	Enthoo Pro M
Category	Enclosure
Language	English