10
STANDOFF POSITIONING
Micro ATX
install extra standos
ATX / E-ATX
(Pre-installed)
These standoffs have a special
collar to keep the motherboard in
place when installing vertically.
Some motherboards require
installation / repositioning
of the standoffs. Please consult
your motherboard manual for
the correct standoff positioning.
REQUIRE:
For repositioning
standoffs
INSTALLING MOTHERBOARD
Use the motherboards screws from the toolbox to install
your motherboard on the pre-installed standoffs.
By loosening the thumb screws you can
slide the Cable Covers left and right for
optimal cable management.
To Next Page
Loading...
