Phanteks Evolv X - CONNECTING THE UNIVERSAL FAN HUB

13
CONNECTING THE UNIVERSAL FAN HUB
The White Connector will provide the
RPM signal to the motherboard.
1.
2.
CONNECT THE FAN HUB 4PIN CABLE TO
YOUR MOTHERBOARD FAN HEADER
CONNECT EXTRA FANS TO THE CORRESPONDING
CONNECTOR ON THE UNIVERSAL FAN HUB
Choosing a PWM output provides the most
customization options in the motherboard
settings.
You can choose a PWM or DC output in the
motherboard settings. The Fan Hub will
automatically translate the signal to all
connected 3- and 4-pin fans.
Check WWW.PHANTEKS.COM/FAQ for more technical
details.
3.
CONNECT THE SATA CABLE TO THE POWER SUPPLY
WHITE 3-/4-PIN UNIVERSAL
BLACK 4-PIN
BLACK 3-PIN
TO PSU
TO MOTHERBOARD
SATA
FAN HUB 4-Pin
Expand the number of fans with splitter
cables up to a maximum of 4A total power.
Splitter cables are sold separately:
PH-CB-Y4P / Y3P