P a g e 16 | 49
3. Select your local time zone and click Next.
4. Specify your Internet connection type, enter the relevant account information as
required and click Next. Contact your Internet Service Provider (ISP) if you are not sure
about this step.
P a g e 17 | 49
commonly used if internet service provider does
not provide any IP to use. Router will obtain IP address
information automatically.
PPPoE is typically used for
username and password provided by your internet
service provider.
Select Static IP if internet service provider provides the
static IP address, subnet mask, default gateway and DNS
server address.
t PPTP or L2TP if ISP provides the username,
password, and VPN server IP.
Note
Contact your ISP if you are not sure about your internet connection type.
5. Set SSID and password for your wireless network or use the default settings. Click Save
to complete the setup.
6. Now WiFi has been successfully set up on your router. If your device does not
automatically connect to the wireless network, please connect manually. You can also
click More Settings for further advanced configuration. If you need to use IPTV
function, please click IPTV for the relevant settings.
To Next Page
Loading...
Need help?
General
Weight and Dimensions