P a g e 14 | 49
4 Get started
This section gives instructions of the procedures that must be performed to enable the
wireless router.
4.1 TCP/IP settings
The IP address has to be obtained automatically before starting the configuration of the
router. Please follow these steps:
1. With the right mouse button please click on the right bottom corner. Click Open
Network and Sharing Center and select Change adapter settings on the upper left
of the screen.
2. Right-click network connection type and select Properties. In the Properties window
double click Internet Protocol Version 4 (TCP/IPv4).
P a g e 15 | 49
3. Select both Obtain an IP address automatically and Obtain DNS server address
automatically. Click OK to confirm the configuration.
4.2 Configuring router via web browser
1. On your web browser, enter
p.to
or
192.168.2.1
or
10.10.10.1
in address bar and click
Start Setup to run the setup wizard.
2. Create a login password for your router and click Next.
To Next Page
Loading...
Need help?
General
Weight and Dimensions