10BDL3051T
13
* Custom app
(4)Security
* Change the Administrator Password
* External Storage
3.3.6.1 General Settings
(1) Signage Display Name
Setup the PD‟s name. The default name is “PD_”
+ Ethernet Mac Address.
* length: 36 characters maximum
* no limitation in format
(2) Monitor ID
Monitor id/group : 1 – 255.
(3) Boot Logo
* 3 options : Off/On/User
*In User mode, you can select your own power-on
movie (i.e. boot animation).
i. The file name of the power-on movie should be :
bootanimation.zip
ii. When you select the power-on movie, it will
check SD card and USB drive to see if there is
“bootanimation.zip” file automatically, and pop up a
window for you to choose.
Function introduction:
* File location options:
/data/local :
Choose the customized Power-on movie
copied from SD card or USB drive..
/mnt/external_sd :
Choose the Power-on movie found in SD card.
/mnt/usb_storage :
Choose the Power-on movie found in USB
drive.
* Save
If you pick “/mnt/external_sd” or “/mnt/usb_storage”,
and click “Save”, it will copy the file
“bootanimation.zip” to the path “/data/local/”.
* Forget
When you click “Forget”, it will clear the customized
To Next Page
Loading...
