Philips 10BDL3051T - Audio Decode Support Details; Image Decode Support Details; 5. Cleaning and Troubleshooting; 5.1. Cleaning Instructions

10BDL3051T
33
Audio Decode
Type
Audio Codec
Container
Decode
Encode
Channel
Remark
MPEG
Audio
MPEG1/2/2.5 Audio
Layer1/2/3
Decode: MP1,
MP2, MP3
V
2
Bit Rate: 8kbps~320Kbps, CBR and
VBR
Sampling Rate: 8KHZ~48KHz
Windows
Media Audio
WMA Version 4,4.1,
7, 8, 9, wmapro
Decode: WMA
V
2
Bit Rate: 8kbps~320Kbps
Sampling Rate: 8KHZ~48KHz
Non-support WMA Pro、lossless and
MBR
AAC Audio
MAIN, ADIF ,ATDS
Header AAC-LC and
AAC-HE
File Format:
AAC, M4A
V
5.1
Bit Rate: N/A
Sampling Rate: 8KHZ~48KHz
Image Decode
Type
Audio Codec
Container
Decode
Encode
Channel
Remark
JPEG
JFIF file format 1.02
ile Format: JPG,
JPEG
V
Decode: Resolution 48X48 to
8176X8176
(1) Not Support Non-interleaved Scan
(2) Software support SRGB JPEG
(3) Software support Adobe RGB
JPEG
BMP
BMP
File Format:
BMP
V
Maximum Supported Image
Size:4096x4096 pixels
GIF
GIF
File Format: GIF
V
Resolution No Restriction
PNG
PNG
File Format:
PNG
V
Resolution No Restriction
5. Cleaning and Troubleshooting
5.1. Cleaning
Caution When Using the Monitor
* Be sure to disconnect all cables before moving the monitor. Moving the monitor with its cables attached
may damage the cables and thus cause fire or electric shock.
* Disconnect the power plug from the wall outlet as a safety precaution before carrying out any type of
cleaning or maintenance procedure.
Front Panel Cleaning Instructions
* The front of the display has been specially treated. Wipe the surface gently using only a cleaning cloth or a
soft, lint-free cloth.
* If the surface becomes dirty, soak a soft, lint-free cloth in a mild detergent solution. Wring the cloth to
remove excess liquid. Wipe the surface of the display to remove dirt. Then use a dry cloth of the same type
to dry.